The STEP 110 our new automatic wet cleaning machine that cleans the steps and risers of escalator steps at the same time.

The STEP 110 our new automatic wet cleaning machine that cleans the steps and risers of escalator steps at the same time.

To clean the escalators the steps may remain installed. To clean the escalator, you have to stop it. Then you place the machine on the escalator. While the machine stands still on the escalator you can choose between 3 different cleaning programs. The programs are different in the running time as well as in the amount of water and cleaning chemical is sprayed on the escalator’s steps. The first program takes 15 seconds and is designed for light or maintenance cleaning. In the second program the cleaning cycle takes 27 seconds. The program is designed for a regular cleaning with big gaps in-between while the third program is designed for heavy cleaning. The cleaning cycle takes 39 seconds and removes very hard, long time not removed dirt.

Thanks to the symbols on the user interface the machine is easy to operate. You can choose the program by just turning a rotary switch.

During the cleaning cycles you will experience the new brush system. With its 18 brushes and the new rail design it can produce more pressure on the surface and can therefor clean faster and more efficient the escalator steps. Another plus point is that the gap between the steps can be cleaned much deeper than before.

With the 20 Liter tanks, which are easy to transport thanks to the integrated handles, long cleaning cycles can be achieved on the escalator. Different lengths and materials of the integrated brushes ensure that all types of soiling are eliminated quickly.

Our cleaners are considered to be especially durable, and this is also reflected in the STEP 100. It is ensured that only high-quality materials such as stainless steel, durable aluminum and splash resistant, stable plastic is used.

20-litre tanks
  • Permit a long cleaning time
Integrated suction
  • The cleaning mixture is immediately sucked away
  • No liquid gets inside the escalator -> the escalator does not suffer any damage
  • The steps are dried by the exhaust air of the vacuum motor
18 revolving brushes
  • Faster cleaning because of more brushing in the same time (compared to 15 brushes from STEP 100)
  • Cleaning of both the tread areas and risers in a single operation
  • Different materials and lengths of brushes for removing the various forms of dirt and debris
Easy adjustment to steps
  • Can be used on escalators made by all manufacturers
Hose holder
  • Prevents the residual dirt located in the hoses from getting on the escalator or the floor
Gliding wheels
  • Easy to move the machine on the escalator
High-quality materials
  • Maximum reliability
  • Extremely durable
  • Low running costs
Use of symbols
  • Intuitive operation
  • No language barriers
  • The machine is supplied with a wide range of accessories, such as a trolley, groove rake and spanner.
Compact design
  • Thanks to its small dimensions, the machine can also be brought to the required floor using lifts
Cleaning on site
  • No downtime
  • The escalator can be used again immediately after cleaning
Working width: 520 mm
Step height min.: 185 mm
Step height max.: 235 mm
Basic cleaning per step: 15 s (2x)
Maintenance cleaning per step: 27 s (2x)
Intensice cleaning per step: 39 s (2x)
Extraction air quantity max.: 162 m³ / h
Underpressure: 300 mbar
Type of current / Frequency: 50 – 60 Hz
Power supply: 110 V and 230 V Version available
Rated input power: 2300 W
Brush motor: 750 W
Suction motor: 1500 W
Spindle drive: 2×180 W
Pump: 40 W
Fresh water tank: 20 l
Dirty water tank: 20 l
Dimensions (L x W x H): 1094 x 540 x 1001 mm
Weight: 171 kg
Number of brushes: 18 + 1
Noise level: 78 ± 2 dB (A)